Volk Sicherheitstechnik e.K. - Volk Sicherheitstechnik e.K. Page 6

Volk Sicherheitstechnik e.K.

The Panic Door Opener for the easy opening of closed, single rebate doors that open to the outside, also with very difficult latches. Also suitable for use with double rebate doors, Ø1.0mm

27,37 EUR

incl. 19% tax excl. Shipping costs

Special Clamping Pliers

Situation: There is a key on the inside of the door and it is turned. The door is closed but not locked, and a second key exists. This key, however, cannot be used because the cylinder has no emergency function. If the second key is machined accordingly, the door can still be unlocked. This clamping tool replaces the vice on the door, so keys can be opti-mally clamped for machining.

31,18 EUR

incl. 19% tax excl. Shipping costs

Lifter with 3 Square Bolt Knives

This tool can be used to lift security lock fittings for door entry, and it can also be used in an emergency situati-on to completely tear off security fittings. There is a square bolt knife marking on the lifter for optimal use.
Included in delivery are three square bolt knives for 8mm, 9mm and 10mm - The knives are inserted in the gap under the lock plate and used to open the door by rotating the lock spindle.
The rounded edges prevent the steel from tearing out; the blades are thinner on the surface in order to achie-ve highest possible elasticity.

171,18 EUR

incl. 19% tax excl. Shipping costs

Square Bolt Knife Set (3 pcs)

The knives are inserted in the gap under the lifted plate and used to open the door by rotating the spindle. The rounded edges prevent the steel from tearing out; the blades are thinner on the surface in order to achieve highest possible elasticity.
8mm for 72mm latch distance (room doors); 9mm for panic locks and fire doors; 10mm for 92mm latch distance (front doors)

35,58 EUR

incl. 19% tax excl. Shipping costs

Mandrel with Cutting Disc

Cutting discs are clamped into this mandrel and can then be used for various tasks with the help of the straight grinder. For example, cutting the door hinges, processing a duplicate key and much more. Supplied with: Mandrel with Cutting Disc

22,49 EUR

incl. 19% tax excl. Shipping costs

2 Satinless Steel Hooks

Consisting of left and right. Special tool for latch and bolt breakage.

28,56 EUR

incl. 19% tax excl. Shipping costs

Cylinder Profile Rod

Ideal accessory for the installation of new fittings, locks and cylinders. Length 280mm. The profile rod enables precise horizontal alignment and a clean and accurate fit when installing fittings.
This helps to ensure that filing the closing nose, or drilling holes that are too large, or other similarly unclean working methods are a thing of the past.

21,30 EUR

incl. 19% tax excl. Shipping costs

Mounting Blade

For pressing down the pin tumblers.

7,74 EUR

incl. 19% tax excl. Shipping costs

Show 41 to 48 (from a total of 182 products)